Huawei Accessories Products, Prices & Part Numbers

Nillkin PowerTrio 3in1 Wireless Charger for Huawei Watch White

Input overvoltage protection In this protection state, the power module is turned off and stops supplying power. When the system recovers from input overvoltage, the power module can automatically start supplying power again. Output overvoltage protection If output overvoltage is caused by the power module itself, the power module stops supplying power. When the system recovers from output overvoltage, the power module cannot automatically start supplying power again Technical Specifications Dimensions without packaging (H x W x D) [mm(in.)] : 130 mm x 41 mm x 417.4 mm (5.1 in. x 1.6 in. x 16.4 in.) Weight without packaging [kg(lb)] : < 3 kg Number of inputs : 1 Rated input voltage [V] : 220 V AC/110 V AC; 50/60 Hz, 240 V DC Input voltage range [V] 90 V AC to 290 V AC; 47 Hz to 63 Hz 190 V DC to 290 V DC The maximum current of the power cable used by the 3000 W AC power module is 16 A. When the 220 V input is used, the minimum voltage cannot be lower than 200 V. When the 110 V input is used, the minimum voltage cannot be lower than 100 V. Maximum input current [A] : AC input: 16 A, High-voltage DC input: 14 A Rated output voltage [V] : 53.5 V DC Rated output current [A] : 56.1 A (220 V AC input or 240 V DC)/28.1 A (110 V AC Input) Rated output power [W] : 3000 W (220 V AC input or 240 V DC)/1500 W (110 V AC input) Power dissipation Mode : Heat dissipation with fan Hot swapping : Supported

LST7MPUE0001 (S12700E main control unit E) LST7MPUE0001 and LST7MPUE0000 can be installed in the same chassis. After an active/standby switchover occurs in a chassis, fans in the chassis change to the intelligent speed adjustment mode. If you want the fans to run at a specific speed, run the set fan-speed command to set the fan speed after the switchover. Boards manufactured since November 2021: If these boards need to be used in V200R020C10SPC500, install V200R020HP0010 or a later patch. The MPU is the system control and management unit for the switch. It integrates the main control unit, clock unit, and system maintenance unit. The MPU supports the following OAM functions: 802.1ag: identifies, detects, and sends continuity check (CC) packets. Multiprotocol Label Switching (MPLS OAM): identifies, detects, and sends MPLS OAM packets. OAM UNCFG_MEP. Item Specification Dimensions without packaging (H x W x D) [mm(in.)] : 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.) Weight without packaging [kg(lb)] : 2.75 kg(lb) Typical power consumption : [W] 48 W Typical heat dissipation : [BTU/hour] 163.78 BTU/hour Maximum power consumption : [W] 48 W Maximum heat dissipation : [BTU/hour] 163.78 BTU/hour Memory : 16GB (not expandable) Storage : NAND flash: 2 GB, built-in

Appearance Figure 7-47 Appearance of the LST7G48TX6S0 Technical Specifications Dimensions without packaging (H x W x D) [mm(in.)] : 35.1 mm x 397.2 mm x 430.4 mm (1.38 in. x 15.64 in. x 16.95 in.) Dimensions with packaging (H x W x D) [mm(in.)] : 160 mm x 510 mm x 570 mm (6.3 in. x 20.1 in. x 22.44 in.) Weight without packaging [kg(lb)] : 3.70 kg (8.16 lb) Weight with packaging [kg(lb)] : 5.75 kg (12.68 lb) Typical power consumption [W] : 140 W Typical heat dissipation [BTU/hour] : 477.69 BTU/hour Maximum power consumption [W] : 144 W Maximum heat dissipation [BTU/hour] : 491.34 BTU/hour Memory : 1 GB

WR480PA02, Huawei Power Adapter, 12V3A/100-240VAC/1.2m cable

S1730S-L8F-A, Huawei S1730 Switch, 8x10/100Base-TX, AC adapter

S1730S-L4T1T-MA, Huawei S1730S Series Switch, 5xGE RJ45/AC Adapter

S1730S-L4P1T-MA, Huawei S1730S Switch, 5xGE RJ45/4xPoE+/AC Adapter

S1730S-L4P-A, Huawei S1730S Switch, 4xGE PoE+/AC Adapter

S1700-8-AC, Huawei Quidway Switch S1700, 8x10/100Base-T/AC adapter/Mainframe

S100-8T, Huawei S100 Switch, 8xGE RJ45/National AC Adapter

S100-8P1S, Huawei S100 Switch, 8xGE PoE+/1xSFP/AC Adapter