Buy H3C Products in Dubai | Price & Stock

H3C WA6620X is a wireless Access Point.

Weight: 1.8kg

Dimensions (W × D × H): 250mm x 250mm x 79.5mm (without mounting brackets)

Interface: 1 x 10/100/1000M Ethernet, RJ-45, PoE input 1 x 10/100/1000M Ethernet, RJ-45, PoE output 1 x 1000M optical port, SFP

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 10/100/1000M Ethernet, 802.3at/af

PoE output: 1 x 10/100/1000M Ethernet, 802.3af

Local power supply: POE injector (sold separately)

Antenna type: Support built-in directional antenna (default) Support extended external antenna Note: Only one of the two modes (internal antenna and external antenna) can be selected.

Antenna gain: 5GHz peak gain: 11dBi 2.4GHz peak gain: 11dBi Note: Horizontal beamwidth (HBW): 65 degrees, Vertical beamwidth (VBW): 30 degrees

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 27 dBm 2.4GHz: 30 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Installation: Wall mounting/Pole mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -40°C to +65°C Storage temperature: –40°C to +70°C Note: The value may vary depending on the installation environment.

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68 Note: Even when used with external antenna

Surge protection: Common Mode：6KV

Overall power consumption: 31W (including PSE) 16W (excluding PSE) Note: Power required at the power source equipment (PSE) will depend on the cable length and other environmental issues.

Safety standards: IEC/EN 62368-1 GB 4943.1 SRRC

Buy H3C WA6620X in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6630X is a wireless Access Point.

Weight: 4.0kg

Dimensions (W × D × H): 260mm x 260mm x 394mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output 1 x 100/1000M Ethernet, RJ-45

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at/af

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: POE injector (required and sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5.8GHz peak gain: 5dBi 5.2GHz peak gain: 5dBi 2.4GHz peak gain: 6dBi Note: The equivalent antenna gain is 4dBi in 5.8GHz, 4dBi in 5.2GHz, and 5dBi in 2.4GHz

Built-in IoT module: BLE5.0

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 27 dBm 2.4GHz: 27 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Installation: Wall mounting/Pole mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -30°C to +65°C Storage temperature: –40°C to +85°C

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Overall power consumption: 48.6W (including PSE) 33.6W (excluding PSE) Note: Power required at the power source equipment (PSE) will depend on the cable length and other environmental issues.

Safety standards: IEC/EN 62368-1 GB 4943.1 SRRC

Buy H3C WA6630X in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6320H-HI is a wireless Access Point.

Weight: 0.3kg

Dimensions (W × D × H): 160mm X 86mm X 39mm (without mounting brackets)

Interface: Front panel: 1x 100/1000M Ethernet port, RJ-45, PoE output 3x 100/1000M Ethernet port, RJ-45 Back panel: 1x uplink 100/1000M Ethernet port, RJ-45, PoE input 1x uplink 1000M SFP port

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x uplink 100/1000M Ethernet port, 802.3at/af

PoE output: 1 x 100/1000M Ethernet port, 802.3af

Local power supply: 54V DC (Phoenix Connector) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 4dBi Note: The equivalent antenna gain is 5dBi in 5GHz and 3dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Installation: Wall mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: 0°C to +40°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP31

Surge protection: Common Mode：4KV

Buy H3C WA6320H-HI in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6520H is a wireless Access Point.

Weight: 0.35Kg

Dimensions (W × D × H): 160 mm × 86 mm × 39 mm (without mounting brackets)

Interface: Front panel: 4x 100/1000M Ethernet port, RJ-45 Back panel: 1x uplink 100/1000M Ethernet port, RJ-45, PoE input 1x 1000M/2.5G SFP

Console port: 1x Management console port (RJ-45)

PoE input: 1x uplink 100/1000M Ethernet port, 802.3af

Local power supply: 54V DC (Phoenix Connector) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 4dBi Note: The equivalent antenna gain is 5dBi in 5GHz, 3dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: 0°C to +40°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Overall power consumption: 15W (including USB) 12.5W (excluding USB)

Buy H3C WA6520H in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6520-SI is a wireless Access Point.

Weight: 670g

Dimensions (W × D × H): 190mm X 190mm X 40mm (without mounting brackets)

Interface: 1 x 100/1000M Ethernet, RJ-45, PoE input

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (Phoenix Connector) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 4dBi 2.4GHz peak gain: 3dBi

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +45°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Overall power consumption: 13.5W

Buy H3C WA6520-SI in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6320-SI-H20 is a wireless Access Point.

Weight: 250g

Dimensions (W × D × H): 136 mm × 136 mm × 36 mm (without mounting brackets)

Interface: 1 x 100/1000M Ethernet, RJ-45, PoE input

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M Ethernet, 802.3af Note: Compatible with IEEE 802.3af/at PoE switches

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 5dBi 2.4GHz peak gain: 3dBi

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +45°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Overall power consumption: 11.88W

Safety standards: IEC/EN 62368-1 GB 4943.1 SRRC

Buy H3C WA6320-SI-H20 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6622 is a wireless Access Point.

Weight: 0.94kg

Dimensions (W × D × H): 215mm X 215mm X 45mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G Multigigabit Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G Multigigabit Ethernet, 802.3at/af

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 6dBi Note: The equivalent antenna gain is 5dBi in 5GHz and 5dBi in 2.4GHz

Built-in IoT module: BLE5.0

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 20 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Buy H3C WA6622 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6520 is a wireless Access Point.

Weight: 0.5Kg

Dimensions (W × D × H): 180mm X 180mm X 32mm (without mounting brackets)

Interface: 1 x 100/1000M Ethernet, RJ-45, PoE input 1 x 1000M/2.5G optical port

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (Phoenix Connector) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 5dBi 2.4GHz peak gain: 4dBi Note: The equivalent antenna gain is 4dBi in 5GHz and 3dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Overall power consumption: 12.95W

Buy H3C WA6520 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6526E is a wireless Access Point.

Weight: 1.05kg

Dimensions (W × D × H): 185 mm × 185 mm × 35 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3at/af

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: External antenna (sold separately)

Antenna gain: The Antenna Gains are dependent on External antenna

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 26 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Buy H3C WA6526E in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6628 is a wireless Access Point.

Weight: 1.28kg

Dimensions (W × D × H): 239 mm × 236 mm × 52 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE input

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at 1 x 100/1000M Ethernet, 802.3at/af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5GHz peak gain: 5.3dBi 2.4GHz peak gain: 4.8dBi Note: The equivalent antenna gain is 4dBi in 5GHz, 3dBi in 2.4GHz

Built-in IoT module: BLE5.0

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 29 dBm 2.4GHz: 26 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Surge protection: Common Mode：4KV

Buy H3C WA6628 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6320 is a wireless Access Point.

Weight: 0.4kg

Dimensions (W × D × H): 185 mm × 185 mm × 33 mm (without mounting brackets)

Interface: 1 x 100/1000M Ethernet, RJ-45, PoE input

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 4dBi Note: The equivalent antenna gain is 5dBi in 5GHz, 3dBi in 2.4GHz

Built-in IoT module: BLE5.0

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Overall power consumption: 12.42W

Buy H3C WA6320 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6526 is a wireless Access Point.

Weight: 1.05kg

Dimensions (W × D × H): 185 mm × 185 mm × 35 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 5dBi 2.4GHz peak gain: 5dBi Note: The equivalent antenna gain is 4dBi in 5GHz, 4dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 26 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Buy H3C WA6526 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6636 is a wireless Access Point.

Weight: 1.05kg

Dimensions (W × D × H): 225mm X 225mm X 46mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at/af 1 x 100/1000M Ethernet, 802.3at/af

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5GHz peak gain: 5dBi 2.4GHz peak gain: 5dBi Note: The equivalent antenna gain is 3dBi in 5GHz and 3dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 26 dBm 2.4GHz: 26 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Buy H3C WA6636 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6330 is a wireless Access Point.

Weight: 0.94Kg

Dimensions (W × D × H): 215mm X 215mm X 45mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3at/af

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 6dBi Note: The equivalent antenna gain is 5dBi in 5GHz and 5dBi in 2.4GHz

Built-in IoT module: BLE4.2

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 23 dBm 2.4GHz: 23 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Buy H3C WA6330 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6528i is a wireless Access Point.

Weight: 1.05Kg

Dimensions (W × D × H): 225mm X 225mm X 40mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G Ethernet, 802.3bt/at

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna Gain: 5GHz peak gain: 6dBi 2.4GHz peak gain: 4dBi Note: The equivalent antenna gain is 5dBi in 5GHz and 3dBi in 2.4GHz

Built-in IoT module: BLE5.1

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 26 dBm 2.4GHz: 26 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -10°C to +55°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Buy H3C WA6528i in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA6638 is a wireless Access Point.

Weight: 1.28kg

Dimensions (W × D × H): 239 mm × 236 mm × 52 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at

PoE output: 1 x 100/1000M Ethernet, 802.3af

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5.8GHz peak gain: 5.3dBi 5.2GHz peak gain: 4.7dBi 2.4GHz peak gain: 4.8dBi Note: The equivalent antenna gain is 4dBi in 5.8GHz, 4dBi in 5.2GHz and 3dBi in 2.4GHz

Built-in IoT module: BLE5.0

Frequency bands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160)

Maximum transmit power: 5GHz: 26 dBm 2.4GHz: 26 dBm Note: Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(Cloudap/Fitap)

Kensington: Kensington security slot

Installation: Wall mounting/ceiling mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: +0°C to +50°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP42

Buy H3C WA6638 in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7610E-T is a wireless Access Point.

Weight: 3.84kg

Dimensions (W × D × H): 260 mm × 482.6 mm × 43.7 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G Ethernet, M12 connector 1 x 1000M/10G optical port, SFP+ 1 x 10/100/1000M Ethernet, M12 connector

Console port: 1 x Management console port (RJ-45)

Local power supply: 100–240 VAC or 70–143 VDC (one 3-pin WAGO connector) 18–36 VDC (one 3-pin Phoenix connector)

Antenna type: External antenna

Antenna gain: The Antenna Gains are dependent on External antenna

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)

Adjustable power granularity: Configurable in increments of 1dBm

Installation: Rack /slide rails mounting, the AP does not come with the mounting bracket by default and must be purchased separately

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: –40°C to +55°C Storage temperature: –40°C to +85°C Note: The value may vary depending on the installation environment.

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP42

Surge protection: Common Mode：6KV

Safety standards: IEC/EN 62368-1 GB 4943.1

EMC standards: EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 55032 EN 55035

Radio standards: ETSI EN 300 328 ETSI EN 301 893 FCC Part 15E ETSI EN 303 687

RoHS standards: DIRECTIVE 2011/65/EU EN IEC 63000:2018

Health standards: EN 50385:2017 EN IEC 62311:2020

Vibration&Impact standards: GB/T 2423.56-2018 GB/T 2423.5-2019 GB/T 21563-2018 IEC 61373:2010

Buy H3C WA7610E-T in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7220CE is a wireless Access Point.

Weight: 1.15kg

Dimensions (W × D × H): 128 mm × 180 mm × 38 mm (without mounting brackets)

Interface: 4 x 10/100/1000M Ethernet, RJ-45 1 x 1000M/2.5G/5G/10G optical port, SFP+

Console port: 1 x RS232 port, 5-pin Phoenix connector 1 x RS485 port, 5-pin Phoenix connector

PoE input: 1 x 10/100/1000M Ethernet, RJ-45, PoE input

Local power supply: Come with Phoenix connector

Antenna type: External antenna

Antenna gain: The Antenna Gains are dependent on External antenna

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT160)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Installation: Side mounting ears/bottom mounting ears/rear DIN rail mounting, with the mounting ears included as standard; DIN rail clips require separate purchase

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -40°C to +60°C Storage temperature: -40°C to +85°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP52

Surge protection: Common Mode：6KV

Safety standards: IEC/EN 62368-1 GB 4943.1

EMC standards: EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 60601-1-2 EN 55032 EN 55035

Radio standards: ETSI EN 300 328 ETSI EN 301 893, FCC Part 15E, ETSI EN 300 440 ETSI EN 303 687

RoHS standards: EN IEC 63000:2018

Buy H3C WA7220CE in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7628XE is a wireless Access Point.

Dimensions (W × D × H): 282 mm × 282 mm × 90 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Ethernet, RJ-45, PoE input 1 x 1000M/2.5G/5G/10G optical port, SFP+, PoE input 1 x 10/100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M/2.5G/5G/10G Ethernet, 802.3bt/at 1 x 1000M/2.5G/5G/10G optical port, 802.3bt/at

PoE output: 1 x 10/100/1000M Ethernet, 802.3af

Antenna type: Support built-in directional antenna (default) Support extended external antenna

Antenna gain: 6GHz peak gain: 10dBi 5GHz peak gain: 11dBi 2.4GHz peak gain: 11dBi Note: If external antennas are used, the antenna gain is determined by the external antennas employed

Built-in IoT module: BLE5.4

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/Pole mounting, the AP does not come with the mounting bracket by default and must be purchased separately

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -40°C to +65°C Storage temperature: -40°C to +85°C

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Safety standards: IEC/EN 62368-1 GB 4943.1

EMC standards: EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 60601-1-2 EN 55032 EN 55035

Radio standards: ETSI EN 300 328 ETSI EN 301 893, FCC Part 15E, ETSI EN 300 440 ETSI EN 303 687

Buy H3C WA7628XE in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7330X is a wireless Access Point.

Weight: 2.03kg

Dimensions (W × D × H): 260 mm × 260 mm × 84 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 1000M/10G optical port, PSFP, PoE input 1 x 10/100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at 1 x 1000M/10G optical port, 802.3bt/at

PoE output: 1 x 10/100/1000M Ethernet, 802.3af

Local power supply: POE injector (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 6GHz peak gain: 7.3dBi 5GHz peak gain: 7.2dBi 2.4GHz peak gain: 6.8dBi Note: The equivalent antenna gain is 4.7dBi in 6GHz, 4.3dBi in 5GHz and 4.0dBi in 2.4GHz

Built-in IoT module: BLE5.4

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/Pole mounting, the AP does not come with the mounting bracket by default and must be purchased separately

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: –40°C to +65°C Storage temperature: –40°C to +80°C Note: The value may vary depending on the installation environment.

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Buy H3C WA7330X in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7220X is a wireless Access Point.

Weight: 1.336kg

Dimensions (W × D × H): 240 mm × 240 mm × 65 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G Ethernet, RJ-45, PoE input 1 x 1000M/10G optical port, SFP+, PoE input

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3at 1 x 1000M/10G optical port, 802.3at

Local power supply: POE injector (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 5GHz peak gain: 4.4dBi 2.4GHz peak gain: 4.6dBi Note: The equivalent antenna gain is 2.8dBi in 5GHz and 2.9dBi in 2.4GHz

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT160)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/Pole mounting, the AP does not come with the mounting bracket by default and must be purchased separately

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -40°C to +65°C Storage temperature: -40°C to +85°C

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Safety standards: IEC/EN 62368-1 GB 4943.1

EMC standards: EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 60601-1-2 EN 55032 EN 55035

Buy H3C WA7220X in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7320XE is a wireless Access Point.

Weight: 2.05kg

Dimensions (W × D × H): 260 mm × 260 mm × 84 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G Ethernet, RJ-45, PoE input 1 x 1000M/10G optical port, SFP+, PoE input 1 x 10/100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3bt/at 1 x 1000M/10G optical port, 802.3bt/at

PoE output: 1 x 10/100/1000M Ethernet, 802.3af

Local power supply: POE injector (sold separately)

Antenna type: External antenna

Antenna gain: The Antenna Gains are dependent on External antenna

Built-in IoT module: BLE5.3

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/Pole mounting, the AP does not come with the mounting bracket by default and must be purchased separately

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: -40°C to +65°C Storage temperature: -40°C to +85°C

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Buy H3C WA7320XE in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7630X is a wireless Access Point.

Weight: 5kg

Dimensions (W × D × H): 270 mm × 270 mm × 411 mm (without mounting brackets)

Interface: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, RJ-45, PoE input 1 x 1000M/10G optical port, SFP+ 1 x 10/100/1000M Ethernet, RJ-45, PoE output

Console port: 1 x Management console port (RJ-45)

PoE input: 1 x 100/1000M/2.5G/5G/10G Multigigabit Ethernet, 802.3bt/at

PoE output: 1 x 10/100/1000M Ethernet, 802.3af

Local power supply: POE injector (sold separately)

Antenna type: Built-in omni-directional antenna

Antenna gain: 6GHz peak gain: 6.4dBi 5GHz peak gain: 5.8dBi 2.4GHz peak gain: 4.9dBi Note: The equivalent antenna gain is 3.6dBi in 6GHz, 3.2dBi in 5GHz and 2.6dBi in 2.4GHz

Built-in IoT module: BLE5.4

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Kensington security slot

Installation: Wall mounting/Pole mounting, Comes with mounting bracket

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: –40°C to +65°C Storage temperature: –40°C to +85°C Note: The value may vary depending on the installation environment.

Humidity: Operating humidity: 0% to 100% (non-condensing) Storage humidity: 0% to 100% (non-condensing)

Protection class: IP68

Surge protection: Common Mode：6KV

Safety standards: IEC/EN 62368-1 GB 4943.1

Buy H3C WA7630X in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.

H3C WA7320H-HI is a wireless Access Point.

Weight: 315g

Dimensions (W × D × H): 86mm x 170mm x 40mm (without mounting brackets)

Interface: Front panel 5 x 10/100/1000M Ethernet, downlink port, RJ-45 Back panel 1 x 100/1000M/2.5G Ethernet , uplink por t, RJ-45, PoE input 1 x 1000M/2.5G/5G optical, uplink port, SFP

Console port: 1 x Management console port (RJ-45)

USB port: 1 x USB 2.0 at 2.5W

PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3at/af

PoE output: 2 x 100/1000M Ethernet, 802.3af Note: 15W output power shared by 2 ports

Local power supply: 54V DC (center-positive circular plug) power adapter (sold separately)

Antenna type: Built-in antenna

Built-in IoT module: BLE5.3

Antenna gain: 6GHz peak gain: 5.3dBi 5GHz peak gain: 5.4dBi 2.4GHz peak gain: 3.3dBi

Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)

Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)

Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM

Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT160)

Adjustable power granularity: Configurable in increments of 1dBm

Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)

Kensington: Phillips screw

Installation: Wall mounting, the mounting bracket has been preinstalled on the back of the AP

Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system

Temperature: Operating temperature: 0°C to +40°C Storage temperature: –40°C to +70°C

Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)

Protection class: IP41

Surge protection: Common Mode：4KV

Buy H3C WA7320H-HI in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.