WA7322H-HIH3C WA7322H-HI Wireless Access PointAvailable
H3C WA7322H-HI is a wireless Access Point.
Weight: 259g
Dimensions (W × D × H): 86 mm × 86 mm × 40 mm (without mounting brackets)
Interface: Front panel 4 x 10/100/1000M Ethernet, downlink/LAN port, RJ-45 Back panel (uplink port) [1] 1 x 100/1000M/2.5G Ethernet, uplink/LAN/WAN port, RJ-45, PoE input
Console port: 1 x Management Micro-USB port
USB port: 1 x USB 2.0 at 2.5W
PoE input: 1 x 100/1000M/2.5G Ethernet, 802.3at/af
Local power supply: POE injector (sold separately)
Antenna type: Built-in omni-directional antenna
Antenna gain: 6GHz peak gain: 5.2dBi 5GHz peak gain: 5.0dBi 2.4GHz peak gain: 4.0dBi Note: The equivalent antenna gain is 3.1dBi in 6GHz, 3.3dBi in 5GHz and 2.4dBi in 2.4GHz
Frequencybands: 2.400 to 2.4835GHz ISM 5.150 to 5.250GHz U-NII-1 5.250 to 5.350GHz U-NII-2A 5.470 to 5.725GHz U-NII-2C 5.725 to 5.850GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425GHz U-NII-5 6.425 to 6.525GHz U-NII-6 6.525 to 6.875GHz U-NII-7 6.875 to 7.125GHz U-NII-8 Note: The available bands and channels are dependent on the configured regulatory domain (country)
Modulation technology: 802.11b: Direct-sequence spread spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax/be: Orthogonal frequency-division multiple access (OFDMA)
Modulation mode: 11b: BPSK, QPSK, CCK 11a/g/n: BPSK, QPSK, 16QAM, 64QAM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM 11be: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM
Data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 600 (NSS = 1 to 4, HT20 to HT40) 802.11ac: 6.5 to 6,933 (MCS0 to MCS9, NSS = 1 to 8, VHT20 to VHT160) 802.11ax: 7.3 to 9,608 (MCS0 to MCS11, NSS = 1 to 8, HE20 to HE160) 802.11be: 7.3 to 23,059 (MCS0 to MCS13, NSS = 1 to 8, EHT20 to EHT320)
Adjustable power granularity: Configurable in increments of 1dBm
Reset button: Restoration to factory default, AP mode control(CloudAP/FitAP)
Kensington: Phillips screw
Installation: Wall mounting, the mounting bracket has been preinstalled on the back of the AP
Indicators (LED): Yellow/green/blue status LEDs for different working states indicate boot loader status, association status, operating status, and fault states of the system
Temperature: Operating temperature: 0°C to +40°C Storage temperature: –40°C to +70°C
Humidity: Operating humidity: 5% to 95% (non-condensing) Storage humidity: 5% to 95% (non-condensing)
Protection class: IP31
Surge protection: Common Mode:4KV
Safety standards: IEC/EN 62368-1 GB 4943.1
EMC standards: EN 301 489-1 EN 301 489-3 EN 301 489-17 EN 60601-1-2 EN 55032 EN 55035
Buy H3C WA7322H-HI in Dubai, UAE. Check Price & Availability with KOMPLEKT for the required configuration, current price and stock confirmation.
